CBsalary.com Home » Salary Calculator » Salary Search Results for Product Manager - Plumbing Or HVAC Exp. Required

Search Results

Lays out, fabricates, and assembles developmental or experimental structural and mechanical parts and assemblies, and installs parts and assemblies in prototype aircraft or spacecraft, following engineering information, using precision instruments, handtools, power tools, and shop equipment: reads and interprets blueprints, sketches, loft information, and related engineering data to plan sequence of operations and methods for fabricating, assembling, and installing parts and assemblies. Lays out radii, angle, and dimensions of parts on assorted materials, using precision measuring and marking instruments, such as gauges, calipers, scale, and scriber, applying trigonometric calculations to solve layout problems. Sets up and operates shop equipment, such as bandsaw, lathe, table saw, drill press, shear, and brake, to shape and form parts. Verifies dimensions of parts, using precision measuring instruments. Drills, countersinks, and reams holes in parts and assemblies for bolts, rivets, and other fasteners, using power tools. Aligns and joins structural assemblies, using transit, sight level, handtools, power tools, clamps, and fasteners. Installs experimental parts and assemblies in prototype structure to verify accuracy of layout and assembly. Tests functional performance of installed parts. Confers with engineers to resolve fabrication and installation problems. May fabricate or modify tooling, such as jigs, fixtures, templates, and form blocks. May fabricate and assemble reduced-scale mockups of parts and assemblies. May be designated by type of part or assembly developed.

HVAC Engineer

Leads the design, installation, and commissioning of HVAC systems, equipment, and associated control systems. Develops and optimizes operation and maintenance procedures for all HVAC equipment and associated control systems. Troubleshoots and corrects problems with existing HVAC equipment and associated control systems. : Develops validation documentation and implements validation plans in cooperation with the Validation Supervisor. Develops training programs for equipment operation and preventive maintenance. Manages vendors and consultants to ensure that design is in compliance with standards and that contracts contain appropriate technical specifications and are delivered as required. Provides technical expertise during regulatory audits. Authors, reviews, revises, and/or approves Standard Operating Procedures as required. Provides technical support for utility systems.

HVAC Designer

Performs mechanical design activities from design concept to construction documents, acceptance, testing, and hand-over. Interprets system requirements from system diagrams and develops duct designs and related equipment arrangements in a three-dimensional product model environment. : Performs and reviews load calculations, design specifications, and technical drawings. Maintains familiarity with International Mechanical Codes and Building Codes. Identifies customer requirements, researches solutions, and reviews HVAC systems. Coordinates HVAC with architectural/structural, plumbing, electrical, and other disciplines. Prepares sketches, layout, and detail drawings according to design proposals and standards specifications and practices. Resolves design problems related to manufacturing, material, or quality requirements. Verifies accuracy and completeness of finished drawings. Prepares or assists in preparing material and time estimates and equipment cost comparisons. Utilizes Computer Aided Design (CAD) equipment to model systems and components and create complex designs and layouts.

HVAC Mechanic

Installs, services, and repairs heating, ventilating, air conditioning systems, and related environmental-control systems utilizing knowledge of heating and refrigeration theory, pipefitting, and structural layout. : Mounts compressor and condenser units on platform or floor, using hand tools, following blueprints or engineering specifications. Fabricates, assembles, and installs ductwork and chassis parts, using portable metalworking tools and welding equipment. Installs evaporator unit in chassis or in air-duct system, using hand tools. Cuts and bends tubing to correct length and shape, using cutting and bending equipment and tools. Cuts and threads pipe, using machine-threading or hand-threading equipment. Joins tubing or pipes to various refrigerating units by means of sleeves, couplings, or unions, and solders joints, using torch, forming complete circuit for refrigerant. Installs expansion and discharge valves in circuit. Connects motors, compressors, temperature controls, humidity controls, and circulating-ventilation fans to control panels, and connects control panels to power source. Installs air and water filters in completed installation. Injects small amount of refrigerant into compressor to test systems, and adds Freon gas to build up prescribed operating pressure. Observes pressure and vacuum gauges and adjusts controls to ensure efficient operation. Tests joints and connections for gas leaks, using gauges or soap-and-water solution. Wraps pipes in insulation batting and secures them in place with cement or wire bands. Replaces defective breaker controls, thermostats, switches, fuses, and electrical wiring to repair installed units, using electrician's hand tools and test equipment. May install, repair, and service air conditioners, ranging from 15 to 20 tons of cooling capacity, in warehouses and factory buildings.

Mechanic HVAC

Plumbing Assembler Installer

Assembles and installs manufactured building bathroom hardware, fixtures, and plumbing, under direction of plumber: cuts copper tubing according to written instructions, using power saw. Connects, solders, and squares pipes, using solder paste or solder and torch, vice, and level. Selects preassembled wall plumbing units, such as risers, air chamber, and valves, according to diagram. Fastens units to studs with metal braces, using hammer and nails. Selects, assembles, and installs fixtures, such as tub, sink, toilet, and shower fixtures, using handtools. Applies glue to vanity and sets vanity in place.

Plumbing Hardware Assembler

Assembles plumbing fixtures, such as faucets, stoppers, and shower heads, using handtools and power tools: screws pipe fittings into grease traps, check valves, and other plumbing fixtures, using pipe wrench or power wrench. Drills holes in fixtures for bolt attachments, using power drill. Fits parts together and secures parts with screws, bolts, or solder, using handtools and flame solderer. May adjust valves and other linkage to ensure free action of moving parts.

Assembler Aircraft Plumbing & Hydraulics

Lays out, assembles, installs, and tests plumbing and hydraulic systems and components in aircraft, following blueprints and production illustrations, using handtools, power tools, and test equipment: lays out location of parts and assemblies, such as surface control boosters, landing gears, vacuum units, and fuel, oil, oxygen, and water systems, according to specifications, using measuring and marking instruments. Assembles and installs parts and assemblies, using handtools and power tools. Adjusts working mechanisms of installed parts and assemblies to blueprint specifications. Conducts pressure, leak, and functional tests of installed systems, using test equipment. Repairs or replaces malfunctioning system components. May fabricate parts incidental to assembly and installation, using shop equipment.

Aircraft Mechanic Plumbing & Hydraulics

Hydraulic & Plumbing Installer

Search Again

1 2 Next

Search Jobs by Salary Range

Job Openings

Based on your search criteria, you may be interested in the following jobs

- Analyst II, TIS
Entity: Spectrum Health Grand Rapids Shift Length: 8 hours Schedule: Monday - Friday, 8:00 a.m. - 5:00 p.m.Department: Technology & Information...

- Assistant Administrator
Entity: Spectrum Health Rehab and Nursing Centers Shift Length: 8 hours Responsibilities: Under supervision from the Administrator, is responsible...

- Physical Therapist, Day Shift On Call
Shift: 1 - Day Shift Department: PHCMC PHYSICAL THERAPY Employee Status: On Call Nationally recognized for clinical performance and trauma care...

- PEGA PRPC Tech Leads and PEGA PRPC Architects
Exclusive Openings for PEGA Tech Leads and Architects** Job Title: PEGA / PRPC Sr. Developers / Architects / Tech Leads No. of positions: 8 Locations...

- Business Office Manager
Date Posted: 01/11/2010 Facility: Clarkston Surgery Center Job Category: Business Office United Surgical Partners International is a company that...

Negotiating Salary? Would a Degree Help?

Employment Spot

Navigation